While plasma televisions are susceptible to damage from extreme temperatures, mishandling and form operating at high altitudes, they are shipped worldwide by their manufactures without damage. the key is the packing. whenever possible, you should use the manufactures original packing container if you have retained it. If not, your mover can provide you with a special shipping container, or the unit should be packed and shipped in a container that meets the manufacture’s specifications as closely as possible.

Plasma TVs should always be shipped and stored in an upright position.Shipping the units double-boxed and upright strapped to a pallet is recommended.

If storage is involved, the requirements vary by manufacturer, but plasma TVs should be stored in a climate-controlled warehouse where the temperature does not fall below 15 degrees F or above 122 degrees F, and where the humidity does not fall below 10% or exceed 90% with no condensation. Such units should not be stored at altitudes above 9,800 feet.

Some manufactures recommend using only third-party specialists for dismounting and preparing plasma TVs for shipping, with professional installation at the destination for re-installation.

Audio & video components

If you don’t have the owner’s manuals, or even if you do (they can often be found online).you may want to draw a diagram or take a photo of the wiring configuration to help you reconnect your components correctly after your move.  Another good tip is to put small pieces of matching colored tape on the ends of the cables and on the corresponding inputs and outputs of the components.

Remove all discs from your CD and DVD PLAYER(S) before packing to prevent scratches to your discs and damage to the laser in your player. this is also be a good time to make sure that all your discs are back in their proper cases. Some players come equipped with a “transport screw” usually located underneath the unit (check the owner’s manual). Tighten this screw before you pack your player, which will immobilize parts of the mechanism.

If your unit comes with cartridge(stacker) for multi-play remove ie before packing. the cartridge can be wrapped and packed in the same box as the  player . All trays, ehether single or multi-play, should be in the closed position before packing.

The best way to move your components is in the original boxes with the original packing. If you don’t have them, use boxes with enough room for adequate packing material. your mover can provide a sturdy packing container and materials. Packing material should snugly fill the excess room in the box so that the unit will not move around. Plastic bubble sheets make ideal packing material. Newspaper is not recommeded, as it may not securely hold the unit in place

If you have a remote control, be sure to pack it in the same box as your player. all wiring used with your player should also be packed in the same box if you have room. Seal the box with reliable packing tape. Use this packing method for packing your receiver, speakers and other audio and video components.

• Make certain your household pet is wearing proper identification and any required license tags in case they get lost.

• Ask your veterinarian for a copy of your pet’s medical history to take with you, and be sure all shots are current.

• Shortly before the move, your pets may become nervous because of all the unusual activity. Keep a close eye on them; stress may cause them to misbehave or run off. Consider having them boarded during the most hectic days.

• When you move, take along a health certificate and a rabies vaccination certificate. The health certificate, signed by your veterinarian, says your pet is in good condition. The rabies certificate states when and where your pet was vaccinated.

• If you move across state lines, call or write the state veterinarian or State Department of Animal Husbandry for laws on the entry of animals. Some states require up-to-date rabies vaccinations. For example, the state of Hawaii requires a 120-day quarantine for dogs and cats that have just moved from another state.

• After the move, give your pets time to adjust to the new neighborhood. Don’t let your pets roam freely until they learn where new “home” is now — otherwise they may get lost!

• If you pet has an ID implant, remember to have updated contact information.

This item represents a huge investment and is likely an important part of your daily life, so you want to pack it carefully. The central processing unit (CPU) should be handled with extreme care. This unit, which houses the motherboard and disk drive, is especially sensitive to jarring. Use the original carton if possible or another box large and sturdy enough to accommodate the CPU and plenty of packing materials on all sides. Packing peanuts should never be used when packing a computer because they have a tendency to carry a static electrical charge. Don’t forget to label cords and cables before unhooking them so you know where each cord goes after the move. When you arrive at your destination, allow the computer to reach room temperature before attempting to power it up.

Remember that your CD-ROMs are sensitive to heat and cold and should be moved with you rather than in a moving box. And be sure to back up all your computer files and your hard drive before disassembling the computer.

Printer

If you’re moving a laser or ink jet printer, be sure to remove the toner and any ink cartridges and carry them with you if your move occurs during hot weather. For other types of printers, the printer head should be secured to prevent shifting. Check the owner’s manual for preparations specific to your printer model.

Large-screen television

A large-screen TV must be custom-crated prior to moving day – which can be done arranged by a professional mover or a third-party service. Be sure to have any outside antennas disconnected and taken down if they are to be included in your shipment. Most large-screen TV owner’s manuals contain a statement that some adjustment or calibration may be necessary after transport, so make sure you refer to the manual to protect your TV in the best possible way.

Plasma and LCD televisions

Although there are significant differences in the technology of LCD televisions and plasma televisions, the manufacturers’ recommended handling procedures are similar. It is suggested that a qualified third-party service company be used to properly prepare the LCD/plasma televisions for transport. Even with the original packaging, crating for maximum protection is recommended. When your television arrives at its new destination, it is recommended that the televisions be allowed to “set” for a period of time (several hours) before being turned on.

Other electronics

• Determine which, if any, of these items you can live without for a few weeks and pack those first. That way, you’re not rushed and in the throes of packing the entire household and you can pay extra attention to packing these items properly.
• Whenever possible, pack electronics in their original cartons. If that’s not possible, use plenty of proper packing materials as padding. Comforters and blankets make great wraps for stereo and computer equipment, and pillows provide good cushioning.
• Clearly mark “fragile” on the outside of cartons with breakables or delicate electronics. Also mark “this side up” on items containing electronics.
• Use sturdy boxes and professional packing tape because masking tape isn’t strong enough to support fully-packed cartons. Start by padding the bottom of your box with a generous amount of packing material or padding, then wrap electronics with paper (or blankets, sheets) and place in the carton.
• If you have concerns about reassembling any of your electronics, take pictures of the fronts and backs of your current assembly so you’ve got a visual. Then mark which cords hook to which holes before taking them apart.

9. No two moving companies are the same. Some are better than others. Choose carefully. If the move is from point to point within Oregon, only use a mover licensed by the Oregon Department of Transportation, Motor Carrier Transportation Division. Ask the mover to provide its certificate number. It should be apparent on all advertising and paperwork.

8. Get a written, signed estimate, and keep it.

7. Be ready when the mover arrives.

6. Accompany the mover to make up an inventory.

5. Understand and agree with the bill of lading before you sign it.

4. Before your move, make the mover explain its limits of liability and your options for loss and damage protection.

3. Be at the destination at the time agreed upon for delivery.

2. Check the condition of your property before you sign a delivery receipt.

1. Be flexible!!!

Different children may react to moving in different ways. Some kids may become depressed and may keep crying for days because they feel they are in an alien climate. The key to making the move a success with kids is to GET THEM INVOLVED! Be upbeat from the start, and talk to your children as much as possible. Make them come up with ideas on how to make moving better and easier. Make your kids feel they are important members of the family moving team!

Worried About How Your Children Will React to Moving?

Here Are Some Helpful Moving Tips When Moving With Kids:

Expert Moving Advice for Kids of All Ages

1. Do not wait to inform your children about moving. Tell your kids about the move as soon as possible!

It is pretty natural to assume that the less time kids have to think about moving, the easier it will be for your children. However, experts say it is actually the opposite. Kids need time to get used to the idea of moving. Don’t put off telling them about moving.

2. Welcome your children’s questions about moving.

Open lines of communication will go a long way toward helping your children feel comfortable with moving. And it’s okay even if you can’t answer all their questions right now. Your kid’s questions can give you an idea of how they’re feeling about moving — whether they’re excited or uneasy. Some questions may also offer an ideal way to get them involved in the moving process, such as suggesting they get online to locate nearby libraries or parks.

3. Be positive and upbeat about the move.

Your attitude about the move will influence your children’s attitude as well. If you dread moving, then the move will seem dreadful to them too. Be enthusiastic, upbeat, and positive about the new experiences and opportunities in store, and your children will be more likely to feel the same way.

4. Let your children know they can help with the move.

This is a good time to emphasize that the move is a family event and that everyone will be part of the planning, packing, and perhaps even choosing the new home. Start your kids on thinking of things they can do and how to get ready for the move. Assure your kids that their contributions, however small, will be valued and greatly appreciated.

Thank you,

A-Team

PS. Special rates for veterans!

We look forward to this time of year, and have vowed to provide excellent customer service to any of our potential customers. If you are looking for upfront, honest pricing and a professional/uniformed moving crew look to the A-Team!

We are a full service mover, that always puts the customers needs first. With our years of moving experience we can handle anything moving related.

Be sure to check us out on Facebook. We would love to make some new friends.

P.S. we have some great specials, we’d love to save you some money, contact us today!

We have higher quality standards, and are accountable for much more than your typical moving company. Please visit AMSA and read mover about the program.

AMSA – ProMover